| The LTX-5510 "Signal Transporter" Converter pair is
designed to transmit analog and digital signals to a remote location via
fiber optic cable. This product digitizes the input signals at 50 Ms/s
to 12-bit precision, transmits the results over a 1.0 Gb/s fiber link
and reconstructs the signal at the far end. The primary applications are
those situations in which the signal of interest has a high common mode
voltage with respect to the measurement equipment. These applications
include plasma physics experiments, EMC test chambers, power
transmission equipment, and high power laser equipment.
Key
Benefits
- Two Voltage Input Ranges
- Transmits DC to 12.5 MHz with 0.1% accuracy
- Analog data has 12 Bit Precision
- Four independent digital channels, each with DC to 12 MHz
switching rates
- Two Impedance Settings
- Transmits without conducting EMI
Other Fiber Optic Products
HPT-5100 Advanced
Fiber Optic Loss Test Set -
Automatically measures bi-directional fiber loss at multiple wavelengths along
with ORL (optical return loss)
LTS-1500 Automated Hand-Held
Fiber Optic Loss Test Set -
Automatically measures fiber loss at three wavelengths, measures optical power
and performs fiber identification functions
FPM-250 Fiber Optic Power Meter - Low cost shirt-pocket power
meter with universal input connector, InGaAs detector, -75 dBm sensitivity and
200 hour battery life
FLS-1350 Dual Fiber Optic Laser Light Source - Low cost shirt-pocket
1310 nm, 1550 nm or dual wavelength stable laser light source with 270, 1000, or
2000 Hz modulation capability, battery and or wall mount supply operation
VFL-275 Visible Laser Light Source (Fault
Locator) - Visible laser light source
with universal fiber connector finds breaks or stress points in fiber optic
cable. Battery and/or wall mount operation
TIA-xxxx Optical to Electrical Converters
- Optical receivers using InGaAs or Silicon
detectors that cover a wide range of bandwidths and responsivity. Bandwidths
from DC to > 14 GHz
LTX-510 High
Speed Electrical to Optical Converters -
Transmits analog
signals from DC to 60 MHz over a multi mode fiber optic link
LTX-5515 Fast
Precision Analog Fiber Optic Link - Transmits analog signals from DC to
25 MHz with 12-bit precision along with
four multiplexed digital channels
LTX-5520 Word-Width Digital Fiber Optic Links - Transmits 16 bit parallel
data over a single fiber. Words sampled at 50 MS/s
LTX-5525 Very
Fast Word-Width Digital Fiber Optic Link - Transmits 16 bit parallel
data over a single fiber. Words sampled at 100 MS/s
V-250 Fiber Optic Video Links - Transmits Rs-170, PAL and
other video formats over fiber to distances up to 20 km depending on model
|
![[banner]](images/banner.gif)
