Fiber Optic Video Links

V-250 Fiber Optic Video Link

The V-250 video transmission system consists of the Fiber Optic Transmitter, the Fiber Optic Receiver, and two universal power supplies. The system is compatible with NTSC, SECAM, PAL and D2MAC video standards. The Fiber Optic Transmitter can be mounted directly on the BNC output of the camera or video source. The Receiver is equipped with automatic gain control to automatically compensate for varying cable lengths, degradation of splices and variations in signal strength. Cable length can vary from short distances to several kilometers for the 850 nm MM, greater than 5 Km for the 1300 nm MM, and greater than 20 Km for the 1300 nm SM version without the need for amplification.

Key Benefits

Low Cost
Easy to use and install
Eliminates the effects of ground loops and EMI

V-250 (850)	Operates at 850 nm with MM fiber includes universal power supplies
V-250 (1300)	Operates at 1300 nm with MM fiber includes universal power supplies
V-250 (1310-SM)	Operates at 1300 nm with SM fiber includes universal power supplies

Other Fiber Optic Products

HPT-5100 Advanced Fiber Optic Loss Test Set - Automatically measures bi-directional fiber loss at multiple wavelengths along with ORL (optical return loss)

LTS-1500 Automated Hand-Held Fiber Optic Loss Test Set - Automatically measures fiber loss at three wavelengths, measures optical power and performs fiber identification functions

FPM-250 Fiber Optic Power Meter - Low cost shirt-pocket power meter with universal input connector, InGaAs detector, -75 dBm sensitivity and 200 hour battery life

FLS-1350 Dual Fiber Optic Laser Light Source - Low cost shirt-pocket 1310 nm, 1550 nm or dual wavelength stable laser light source with 270, 1000, or 2000 Hz modulation capability, battery and or wall mount supply operation

VFL-275 Visible Laser Light Source (Fault Locator) - Visible laser light source with universal fiber connector finds breaks or stress points in fiber optic cable. Battery and/or wall mount operation

TIA-xxxx Optical to Electrical Converters - Optical receivers using InGaAs or Silicon detectors that cover a wide range of bandwidths and responsivity. Bandwidths from DC to > 14 GHz

LTX-510 High Speed Electrical to Optical Converters - Transmits analog signals from DC to 60 MHz over a multi mode fiber optic link

LTX-5510 Precision Analog Fiber Optic Link - Transmits analog signals from DC to 12.5 MHz with 12-bit precision along with four multiplexed digital channels

LTX-5515 Fast Precision Analog Fiber Optic Link - Transmits analog signals from DC to 25 MHz with 12-bit precision along with four multiplexed digital channels

LTX-5520 Word-Width Digital Fiber Optic Links - Transmits 16 bit parallel data over a single fiber. Words sampled at 50 MS/s

LTX-5525 Very Fast Word-Width Digital Fiber Optic Link - Transmits 16 bit parallel data over a single fiber. Words sampled at 100 MS/s

Send mail to sales@terahertztechnologies.com with questions or comments about this web site. Last modified: 09/26/06

Send mail to sales@terahertztechnologies.com with questions or comments about this web site.
Last modified: 09/26/06