| The LTX-5520 "Signal Transporter" Converter pair
is
designed to transmit 16 independent digital signals to a remote location
via fiber optic cable. These products simultaneously samples all 16 input
channels at 50 Ms/S, converts them to a serial format, transmits the data
over a Gigabit fiber link and converts the signals back to a parallel
format at the receiving end of link. The primary applications are those situations in
which the signals of interest have a high common mode voltage with respect
to the measurement equipment. These applications include plasma physics
experiments, EMC test chambers, power transmission equipment, and high
power laser equipment.
Key Benefits
- 16 independent TTL/CMOS input channels
- Transmits digital signals from 0 to 24 Mb/S on each of 16
channels
- Input signals may be TTL, CMOS, or LVTTL
- Output is LVTTL
- 850 nm multi-mode or 1310 single mode versions available for
links up to 10 km
- Transmits without conducting EMI
Other Fiber Optic Products
HPT-5100 Advanced
Fiber Optic Loss Test Set -
Automatically measures bi-directional fiber loss at multiple wavelengths along
with ORL (optical return loss)
LTS-1500 Automated Hand-Held
Fiber Optic Loss Test Set -
Automatically measures fiber loss at three wavelengths, measures optical power
and performs fiber identification functions
FPM-250 Fiber Optic Power Meter - Low cost shirt-pocket power
meter with universal input connector, InGaAs detector, -75 dBm sensitivity and
200 hour battery life
FLS-1350 Dual Fiber Optic Laser Light Source - Low cost shirt-pocket
1310 nm, 1550 nm or dual wavelength stable laser light source with 270, 1000, or
2000 Hz modulation capability, battery and or wall mount supply operation
VFL-275 Visible Laser Light Source (Fault
Locator) - Visible laser light source
with universal fiber connector finds breaks or stress points in fiber optic
cable. Battery and/or wall mount operation
TIA-xxxx Optical to Electrical Converters
- Optical receivers using InGaAs or Silicon
detectors that cover a wide range of bandwidths and responsivity. Bandwidths
from DC to > 14 GHz
LTX-510 High
Speed Electrical to Optical Converters -
Transmits analog
signals from DC to 60 MHz over a multi mode fiber optic link
LTX-5510 Precision Analog Fiber Optic Link - Transmits analog signals from DC to 12.5 MHz with 12-bit precision along with
four multiplexed digital channels
LTX-5515 Fast
Precision Analog Fiber Optic Link - Transmits analog signals from DC to
25 MHz with 12-bit precision along with
four multiplexed digital channels
LTX-5525 Very
Fast Word-Width Digital Fiber Optic Link - Transmits 16 bit parallel
data over a single fiber. Words sampled at 100 MS/s
V-250 Fiber Optic Video Links - Transmits Rs-170, PAL and
other video formats over fiber to distances up to 20 km depending on model
|
![[banner]](images/banner.gif)
